Spo2 monitoring is essential in the clinical workflow, which guides the doctor's diagnoses and nursing. It is widely used in ICU, surgery, and more department. Continuous Spo2 monitoring improves the detecting of hypoxia to protect the accident caused by hypoxia and enhances patient safety. To avoid cross-contamination, the high-risk department, the disposable spo2 sensor is recommended. Unimed, as a leading manufacturer for medical supplies, provides disposable patient monitoring supplies over the world. We offer top-quality medical cables, sensors, and lead wires to our clients. The disposable SpO2 Sensors from Unimed are compatible with the mainstream patient monitor, have quality equal to the OEM, and various sensors for patients of all ages.
Our products are manufactured with the highest quality standards to guarantee the products are of high quality and compliance with the medical standards. All the materials for the spo2 sensor comply with the RoHS requirement and the EC53 standards with the bending performance test and tension strength test.
The main
advantages of the Unimed disposable spo2 sensors
- 1, To guarantee the sensor has accurate, stable, and rapid measurement, the electrical components for the sensor are all from well-known suppliers in the world. It still has a precise measurement value in low perfusion, movement, or complicate electromagnetic interference. The SpO2 record from 70% to 100%, the deviation is less than 3%.
- 2, The medical-grade cables are double-shielded. Comparing with the single or none Shielded Cable, it has a better performance on anti-noise interference to keep the complete signals.
- 3, Probe with a soft fastener and 3M non-adhesive foam is convenient for wearing and detaching and ensures a good wear condition in comfort even after longtime use.
- 4, The gold-plated pin is reliable on conduction for stable signal transmission and durable in use.
- 5, Enhanced sensor location design avoid sensor movement. The improvement anti-strength for more reliable measurement and longer products lifespan
- 6, The Certification: FDA, CFDA, and CE certificated
- 7, EMC Testing and Bio-compatibility tested and qualified. All the cables and wires from Unimed are latex-free. No allergies would happen.
- 8, To make our products fit all patients, we have various shape designs for the sensor in different sizes and different parts of the body. And there are three types of material available with foam, adhesive and non-adhesive.
The advantages of the cables
High voltage resistance: the withstand voltage for core wire and core wire, core wire, and shield is AC 500V 0.25mA/Min. And it is DC5000V for the conduction wire and exterior. The leakage current is 0.25mA/S. Insulation resistance: DC500V 100MΩ and above.
Mechanical performance guarantee:
1) Load 300g, lifting height 300mm, ±90° swing, 30 times/Min, 3000 times, the on-resistance does not exceed 50% of the initial value; the conductor has no short circuit, open circuit, and no damage to the outer insulation.
2) All materials comply with RoHS
requirements.
Accuracy
test of SpO2 Sensor (Electrical performance meets YY0784 special requirements)
- 1. The range of blood oxygen level is 90%～100%, and the deviation is ≤ ±1%;
- 2. The range of blood oxygen level is 80%～89%, and the deviation is ≤ ±2%;
- 3. The range of blood oxygen level is 70%～79%, and the deviation is ≤ ±3%;
- 3. No definition below 70%. 4. Pulse rate 30-250BPM, the deviation is≤ ±2BPM;
- 5. Perfusion level is 0.3%-7%, mode 1-4 still meet the pulse rate and oxygen saturation level;
- 6. Continuous monitoring for 48H, no interruption during measurement.
- 7. In the EMC electromagnetic interference test, the accuracy meets the requirements;
The use of disposable SpO2 sensors effectively reduces cross-infection, especially for critically ill patients. It can achieve a win-win situation: reduce the maintenance cost of devices, decrease infection risk of medical staff and patients, simplify the clinical workflow, and improve the efficiency of patient care. "Connecting Life Signals, Care People's Health" is the mission of Unimed. We are committed to providing our customers with high-quality and compatible monitoring supplies. If you are looking for a disposable blood oxygen monitoring sensor, please contact us via email or visit our website.
0 Comments